Mitsubishi MOTORS LANCER EVOLUTION Owner'S Manual Download Page 89

Page: 89 / 330

Under normal conditions, the warning lamp comes

on when the ignition switch is turned to the “ON”

position and goes off a few seconds later.

The warning lamp will also come on and remain on

when the SRS airbags and the seat belt pretension-

er system have been activated.

The warning lamp/display is used for both SRS air-

bag warnings and seat belt pretensioner system

warnings.

WARNING

There may be a system error if the warn-

ing lamp/display appears as indicated. In

such cases, an SRS airbag or a seat belt

pretensioner system may not function

properly in a collision. Have your vehicle

checked by a MITSUBISHI MOTORS

Authorized Service Point:

• Even when the ignition switch is in the

“ON” position, the warning lamp does

not come on or it remains on a few

seconds later

• When warning lamp comes on while

driving

• When warning display appears while

driving

SRS servicing

E00407901156

WARNING

We recommend any maintenance per-

formed on or near the components of the

SRS to be performed by a MITSUBISHI

MOTORS Authorized Service Point.

Improper work on the SRS components

or wiring could result in inadvertent de-

ployment of the airbags, or could render

the SRS inoperative; either situation

could result in serious injury.

Do not modify your steering wheel, seat

belt retractor or any other SRS compo-

nents. For example, replacement of the

steering wheel, or modifications to the

front bumper or body structure can ad-

versely affect SRS performance and lead

to possible injury.

If your vehicle has received any damage,

we recommend you to have the SRS in-

spected to ensure it is in proper working

order.

Do not modify your front seats, centre

pillar and centre console.

It can adversely affect SRS performance

and lead to possible injury. If you found

any tear scratch, crack or damage to the

seat fabric near the side airbag, the por-

tion of the front and rear pillars and roof

side rail, you should have the SRS inspec-

ted by a MITSUBISHI MOTORS Au-

thorized Service Point.

NOTE

When you transfer ownership of the vehicle

to some other person, we urge you to alert

the new owner that it is equipped with the

SRS and refer that owner to the applicable

section in this owner’s manual.

If your vehicle has to be scrapped, do this in

line with local legislation and contact a

MITSUBISHI MOTORS Authorized Service

Point to safely dismantle the airbag system.

Seat and seat belts

2-29

OCZE14E3

Summary of Contents for LANCER EVOLUTION











































































































































































































































































































































Search results

Summary of Contents for LANCER EVOLUTION

Reviews:

Related manuals for LANCER EVOLUTION

Brands by name

Popular brands

Mitsubishi MOTORS LANCER EVOLUTION, Owner'S Manual

Search results

Summary of Contents for LANCER EVOLUTION

Reviews:

Related manuals for LANCER EVOLUTION

Brands by name

Popular brands