4. Press the LOCK switch (A) on the keyless
operation key, or the driver or front passen-
ger’s door lock/unlock switch (B) again
within two seconds.
The turn-signal lamps will blink three times
to show that the Dead Lock System has been
set.
NOTE
l
Pressing the LOCK switch (A) once while
the Dead Lock System is set causes the turn-
signal lamps to blink three times, so it is pos-
sible to confirm that the Dead Lock System
is set.
Cancelling the system
E00305300275
When the UNLOCK switch (C) on the keyless op-
eration key, or the driver’s or front passenger’s
door lock/unlock switch (B) is pressed, the doors
will unlock, and the Dead Lock System will be si-
multaneously cancelled.
NOTE
l
If no door is opened within 30 seconds of
unlocking, the doors are automatically re-
locked and the Dead Lock System is simulta-
neously set again.
l
Even when it is not possible to use the key-
less operation system to unlock the doors, it
is possible to use the key to unlock the driv-
er’s door. When the key is used to unlock the
driver’s door, the Dead Lock System is can-
celled for only the driver’s door. If you wish
to subsequently unlock all other doors, turn
the ignition switch to the “ON” or “ACC”
position.
l
It is also possible to adjust the time between
pressing the UNLOCK switch (C), or the
driver’s or front passenger’s door lock/
unlock switch (B) and automatic relocking.
For details, please contact a MITSUBISHI
MOTORS Authorized Service Point.
Locking and unlocking
1-25
OCZE14E3
1
Summary of Contents for LANCER EVOLUTION
