Mitsubishi MOTORS LANCER EVOLUTION Owner'S Manual Download Page 216

Page: 216 / 330

Change the Display Mode

E00738500037

You can change the content of the display indica-

tor.

Press the DISP key to switch the display content.

Each time the DISP key is pressed, the display con-

tent changes.

CAUTION

The operation of changing display con-

tents may impede safe driving, therefore

check safety before operation.

NOTE

Up to 11 characters may be displayed at one

time. To display 12 or more characters, press

the PAGE key, and subsequent characters

will be displayed.

During DAB Reception*

This switches in the order “Service name”, “En-

semble name”, and “CH no. (CH ID)”.

NOTE

If the text information for the service name

and ensemble name cannot be obtained, then

nothing is displayed.

During CD-DA playback

This switches in the order “Disc title”, “Track ti-

tle”, and “Operating status”.

NOTE

If there is no text information to display,

then “NO TITLE” is displayed.

During MP3/WMA/AAC Playback

This switches in the order “Folder title”, “File ti-

tle”, and “Operating status”.

NOTE

If there is no text information to display,

then “NO TITLE” is displayed.

Display the ID3tag

Hold down the DISP key.

This switches the ID3tag display.

[DISP] Each time the key is pressed, this switches

in the order “Album name”, “Track name”, “Artist

name”, “Genre name”*, and “Operating status”.

*: Displayed when playing back audio files on

a USB device (vehicles with a Bluetooth

2.0 interface).

NOTE

During display of the ID3tag, hold down the

DISP key to switch to the folder title display.

The genre name display may not be possible.

During iPod Playback

E00738900028

This switches in the order “Albums”, “Track

name”, “Artist name”, “Genre name”*, and “Oper-

ating status”.

NOTE

If there is no text information to display,

then “NO TITLE” is displayed.

Displayed genre name in equipment by type

(vehicles with a Bluetooth

2.0 interface).

The genre name display may not be possible.

During Bluetooth

2.0 Audio Play-

back*

E00739000013

Operating details are the same as in “During iPod

Playback” on page 5-32.

For pleasant driving

5-32

OCZE14E3

Summary of Contents for LANCER EVOLUTION











































































































































































































































































































































Search results

Summary of Contents for LANCER EVOLUTION

Reviews:

Related manuals for LANCER EVOLUTION

Brands by name

Popular brands

Mitsubishi MOTORS LANCER EVOLUTION, Owner'S Manual

Search results

Summary of Contents for LANCER EVOLUTION

Reviews:

Related manuals for LANCER EVOLUTION

Brands by name

Popular brands