Mitsubishi MOTORS LANCER EVOLUTION, Owner'S Manual

Page: 165 / 330

Refer to “Check engine warning lamp” on page
3-34 and follow the appropriate measures.
When the gearshift lever position display is not
showing
A safety device in the Twin Clutch SST has been
activated due to a possible malfunction in the Twin
Clutch SST.
Refer to “If the gearshift lever position display is
not showing” on page 4-19 and follow the appro-
priate measures.
When warning display is showing or when no
warning is showing in the multi-information dis-
play
A safety device in the Twin Clutch SST has been
activated due to a possible malfunction in the Twin
Clutch SST or in the engine electronic control
module.
Perform the following procedure.
1. Park your vehicle in a safe place and stop the
engine.
2. Restart the engine.
If the vehicle moves and accelerates normally after
this procedure is performed, there is no malfunc-
tion.
However, if the vehicle does not move or acceler-
ate normally, or if this problem occurs repeatedly,
have the vehicle checked by a MITSUBISHI
MOTORS Authorized Service Point as soon as
possible.
CAUTION
l
When the Twin Clutch SST fluid temper-
ature is high, the engine idle speed when
the vehicle is stopped may increase or the
vehicle will have a weak tendency to
creep.
After that, if the Twin Clutch SST fluid
temperature rises even higher, the
warning display will appear.
Full-time 4WD
E00604900192
Full-time 4WD vehicles are propelled by engine
power distributed constantly and appropriately to
all 4 wheels.
Not only does this ensure better handling on dry,
paved roads but also permits better traction when
driving on slippery, wet or snow-covered roads and
when moving out of mud.
These vehicles, however, are not designed for
off-road use, and are unsuitable for driving on
bumpy ground that may cause excessive strain.
Full-time 4WD vehicles should be driven only un-
der the same conditions as are suitable for ordinary
front-wheel drive vehicles.
Starting and driving
4-27
OCZE14E3
4