Mitsubishi MOTORS LANCER EVOLUTION, Owner'S Manual

Page: 34 / 330

Refer to “Locking and unlocking: Doors, Central
door locks” on pages 1-22 and 1-23.
NOTE
l
For vehicles equipped with the mirror retrac-
tor switch, the outside rear-view mirrors au-
tomatically retract when all the doors are
locked using the keyless operation function.
Refer to “Starting and driving: Outside rear-
view mirrors” on page 4-07.
l
For vehicles equipped with the central door
lock switch, the keyless operation function
can be set so that only the driver’s door un-
locks when the driver’s door lock/unlock
switch is pressed.
If the keyless operation function is set to
work as described above, all the doors un-
lock when the driver’s door lock/unlock
switch is pressed two times in succession.
Refer to “Setting of door unlock function”
on page 1-21.
l
The keyless operation function does not op-
erate under the following conditions:
• A door is open or ajar.
• The ignition switch is not in the “LOCK”
position.
• The emergency key is in the ignition
switch.
l
The time between unlocking and automatic
locking can be adjusted. Consult a
MITSUBISHI MOTORS Authorized Service
Point.
Operation confirmation when locking and un-
locking
Operation can be confirmed as shown below. How-
ever, the room lamp will illuminate only if the
front room lamp switch is in the “DOOR” position
or the rear room lamp switch is in the middle (•)
position.
When locking: The turn-signal lamps
will blink once.
When unlocking: The room lamp will il-
luminate for about 15
seconds, the turn-signal
lamps will blink twice.
NOTE
l
Functions can be modified as stated below.
For further information, please contact your
MITSUBISHI MOTORS Authorized Service
Point.
• Activating the operation confirmation
function (blinking of the turn-signal
lamps) only during locking, or only dur-
ing unlocking.
• Disabling the operation confirmation
function (blinking of the turn-signal
lamps).
• Changing the number of blinks for the
operation confirmation function (blinking
of the turn-signal lamps).
Operation of the Dead Lock System
With a vehicle that has a Dead Lock System, it is
possible to set the Dead Lock System using the
driver’s or front passenger’s door lock/open
switch.
(Refer to “Dead Lock System” on page 1-24.)
To open the trunk lid
While carrying the keyless operation key within
the operating range to open the trunk lid, press and
hold down the OPEN switch (A) until the trunk lid
opens.
Also refer to “Trunk lid” on page 1-26.
NOTE
l
The keyless operation function does not op-
erate when the trunk lid is open.
Locking and unlocking
1-10
OCZE14E3
1