Mitsubishi MOTORS LANCER EVOLUTION, Owner'S Manual

Page: 128 / 330

Lamps (headlamps, fog lamp, etc.) au-
to-cutout function
E00532700497
l
If, while the lamp switch is in the “ ” posi-
tion, the ignition switch is turned to the
“LOCK” position or “ACC” position, or the
key is removed from the ignition switch, the
lamps automatically go out when the driver’s
door is opened.
[When the engine was started using the key]
• If the key is removed and the driver’s
door is opened, a buzzer sounds at a high
pitch intermittently to remind the driver
to turn off the lamps.
[When the engine was started using the key-
less operation function]
• If the ignition switch is turned to the
“LOCK” position and the driver’s door is
opened, a buzzer sounds at a high pitch
intermittently to remind the driver to turn
off the lamps.
l
If the ignition switch is turned to the
“LOCK” position or “ACC” position, or the
key is removed from the ignition switch,
while the lamp switch is in the “ ” posi-
tion, the lamps will remain on for about 3
minutes while the driver’s door is shut and
will then automatically go out.
NOTE
l
The lamp auto-cutout will not function when
the lamp switch is in the “ ” position.
l
The lamp auto-cutout function can also be
disabled.
For further information, we recommend you
to consult a MITSUBISHI MOTORS Au-
thorized Service Point.
When you want to keep the lamps on:
1. Turn the lamp switch in the “OFF” position
while the ignition switch is in the “LOCK”
or “ACC” position.
2. Turn on the lamps with the switch in the
“ ” or “ ” position again, then the
lamps will remain on.
NOTE
l
When the engine was started using the key, if
the driver’s door is opened and the key is re-
moved, the lamp monitor buzzer sounds at a
high pitch intermittently.
The buzzer stops when the driver’s door is
closed. (The warning is also displayed on the
multi-information display.)
The buzzer stops in the following manner.
• Turn the lamp switch to the “OFF” posi-
tion.
• Close the driver’s door.
l
When the engine was started using the key-
less operation function, if the driver’s door is
opened and the ignition switch is in the
“LOCK” position, the lamp monitor buzzer
sounds at a high pitch intermittently.
The buzzer stops when the driver’s door is
closed. (The warning is also displayed on the
multi-information display.)
The buzzer stops in the following manner.
• Turn the lamp switch to the “OFF” posi-
tion.
• Close the driver’s door.
Lamp monitor buzzer
E00506100096
[When the engine was started using the key]
If the driver’s door is opened when the key is in the
“LOCK” or “ACC” position or removed from the
ignition switch while the lamps are on, a buzzer
will sound to remind the driver to turn off the
lamps.
[When the engine was started using the keyless op-
eration function]
If, while the lamps are illuminated, the ignition
switch is set to the “LOCK” or “ACC” position, or
the driver’s door is opened with the ignition switch
set to the “LOCK” position, a buzzer will sound to
remind the driver to turn off the lamps.
In both cases, the buzzer will automatically stop if
the auto-cutoff function is activated, the lamp
switch is turned off, or the door is closed.
Instruments and controls
3-38
OCZE14E3
3