Mitsubishi MOTORS LANCER EVOLUTION Owner'S Manual Download Page 210

Page: 210 / 330

Listen to an iPod

E00738000045

By connecting commercially-available iPod/iPhone

devices to this product, you can play back tracks on

these through the product.

CAUTION

Do not leave the iPod/iPhone unattended

in the vehicle.

Never hold these devices in your hand to

operate while driving, as this is danger-

ous.

No indemnification for data loss resulting

when the iPod/iPhone is connected to the

product will be possible.

Depending on how the devices are han-

dled, audio files being damaged or lost,

therefore it is recommended that data be

backed up.

NOTE

Depending on the generation, model, or soft-

ware version of the iPod/iPhone, playback

on this product may not be possible.

(→5-10) Additionally, playback as explained

in this document may not be possible.

Regarding details such as types of iPod/

iPhone that can be connected to equipment

by type (vehicles with a Bluetooth

2.0 in-

terface), and types of files that can be played

back, refer to “Types of connectable devices

and supported file specifications” on page

5-57.

Usage of iPod/iPhone hardware with the lat-

est software version is recommended.

Regarding how to connect the iPod/iPhone,

refer to “How to connect an iPod” on page

5-56.

When connecting the iPod/iPhone, use a

commercially available iPod connection ca-

ble.

Set up the device in order that no unsafe ac-

tions, such as plugging in the connection ca-

ble are taken while driving.

When inserting and removing the iPod/

iPhone, for safety’s sake first stop the vehi-

cle.

Depending on the status of the iPod/iPhone,

it may take some time until the device is rec-

ognized, or playback starts.

Buttons on the product will not operate while

iPod/iPhone is connected.

iPod/iPhone specifications and settings may

mean that connection is not possible, or re-

sult in differences in operation or display.

Depending on audio data in the iPod/iPhone,

track information may not be displayed cor-

rectly.

Depending on the status of the vehicle and

device, the iPod/iPhone may not play back

after starting the engine.

Data containing copyright information may

not play back.

It is recommended that the iPod/iPhone

equaliser settings be set to flat.

Operate the iPod/iPhone while connected to

this product.

If the iPod/iPhone is connected via Bluetooth

as a Bluetooth- capable audio device, then do

not connect the iPod/iPhone using an iPod

cable. Connection using both methods will

result in erroneous operation.

If an iPod/iPhone does not operate correctly,

then remove the iPod/iPhone from the prod-

uct, reset, then reconnect.

Play iPod

Press the MEDIA key to set the iPod as the source.

The selected source is indicated on the display.

Select the Track (File)

Press the

key or

key to select the track.

This enables selection of the next or previous track.

Fast Forward or Rewind

Hold down the 3

key or the 4

key.

Fast forward/rewind is possible.

Switch Playback Mode

Repeat playback and shuffle playback are possible.

Repeat Playback (RPT)

Press the 1RPT key.

Repeat playback of the track currently being

played.

NOTE

Pressing again will cancel.

Shuffle Playback (RDM)

Press the 2RDM key.

Play tracks in the category currently being played

in a random order.

For pleasant driving

5-26

OCZE14E3

Summary of Contents for LANCER EVOLUTION











































































































































































































































































































































Search results

Summary of Contents for LANCER EVOLUTION

Reviews:

Related manuals for LANCER EVOLUTION

Brands by name

Popular brands

Mitsubishi MOTORS LANCER EVOLUTION, Owner'S Manual

Search results

Summary of Contents for LANCER EVOLUTION

Reviews:

Related manuals for LANCER EVOLUTION

Brands by name

Popular brands