Mitsubishi MOTORS LANCER EVOLUTION Owner'S Manual Download Page 288

Page: 288 / 330

When rotating tyres, check for uneven wear and

damage. Abnormal wear is usually caused by in-

correct tyre pressure, improper wheel alignment,

out of balance wheel, or severe braking. We rec-

ommend you to have it checked to determine the

cause of irregular tread wear.

Spare tyre used*

Front

Spare tyre not used

Tyres that have arrows showing rotation direction

Front

*: Vehicle with 245/40R18 93Y size spare tyre

only.

CAUTION

A compact spare tyre can be fitted tem-

porarily in place of a tyre that has been

removed during the tyre rotation. How-

ever, it must not be included in the regu-

lar tyre rotation sequence.

If the tyres have arrows (A) indicating

the correct direction of rotation, swap the

front and rear wheels on the left hand

side of the vehicle and the front and rear

wheels on the right hand side of the vehi-

cle separately. Keep each tyre on its origi-

nal side of the vehicle. When fitting the

tyres, make sure the arrows point in the

direction in which the wheels will turn

when the vehicle moves forward. Any

tyre whose arrow points in the wrong di-

rection will not perform to its full poten-

tial.

Front

CAUTION

Avoid the combined use of different types

of tyres. Using different types of tyres can

affect vehicle performance and safety.

Snow tyres

E01002000666

The use of snow tyres is recommended for driving

on snow and ice. To preserve driving stability,

mount snow tyres of the same size and tread pat-

tern on all four wheels.

Snow tyres worn more than 50 % are no longer

suitable for use as snow tyres.

Snow tyres which do not meet specifications must

not be used.

CAUTION

Observe permissible maximum speed for

your snow tyres and the legal speed limit.

NOTE

The laws and regulations concerning snow

tyres (driving speed, required use, type, etc.)

vary. Find out and follow the laws and regu-

lations in the area you intend to drive.

If flange nuts are used on your vehicle,

change to tapered nuts when steel wheels are

used.

Tyre chains

E01002101954

If tyre chains have to be used, ensure that they are

fitted only on the rear wheels.

Maintenance

8-12

OCZE14E3

Summary of Contents for LANCER EVOLUTION











































































































































































































































































































































Search results

Summary of Contents for LANCER EVOLUTION

Reviews:

Related manuals for LANCER EVOLUTION

Brands by name

Popular brands

Mitsubishi MOTORS LANCER EVOLUTION, Owner'S Manual

Search results

Summary of Contents for LANCER EVOLUTION

Reviews:

Related manuals for LANCER EVOLUTION

Brands by name

Popular brands