Mitsubishi MOTORS LANCER EVOLUTION Owner'S Manual Download Page 209

Page: 209 / 330

Listen to MP3s

E00737900034

This explains how to listen to audio files on a disc.

CAUTION

CD-ROM and CD-R/RW media can only

play back MP3 format audio files.

To Listen to MP3s

Insert the disc.

Insert a disc to automatically start playback. →

“Insert/Eject Discs” on page 5-18

If a disc is already within the product, press the

MEDIA key to switch to CD as the source.

NOTE

Depending on the file structure, it may take

some time to read the contents of the disc.

Select the Track (File)

Press the

key or

key to select the track.

This enables selection of the next or previous track.

Fast Forward or Rewind

Hold down the 3

key or the 4

key.

Fast forward/rewind is possible.

Switch Playback Mode

Repeat playback, random playback, and scan play-

back are possible.

Repeat Playback (RPT)

Press the 1RPT key.

Repeat playback of the track currently being

played.

NOTE

Pressing again will cancel.

Selecting a file, ejecting, fast forwarding, or

rewinding will cancel.

Folder Repeat Playback

Hold down the 1RPT key.

Repeat playback of the tracks within the folder cur-

rently being played.

NOTE

Pressing again will cancel.

Even if the file is selected, folder repeat

playback will not be cancelled.

Random Playback (RDM)

Press the 2RDM key.

Play the tracks in the folder in a random order.

NOTE

Pressing again will cancel.

Folder Random Playback

Hold down the 2RDM key.

Play all tracks in folders on the disc in a random

order.

NOTE

Pressing again will cancel.

Scan Playback (SCAN)

Press the SCAN key.

Play the first 10 seconds of each of the tracks in the

folder currently being played in order.

Search Tracks

Search folders and files, and select a track.

1. Turn the /SEL key to select the folder.

2. Press the /SEL key.

Files within the selected folder are displayed.

3. Turn the /SEL key to select the file.

4. Press the /SEL key.

This plays the selected file (track).

NOTE

While the folder is selected, press the 6

key to cancel track search mode.

If there is no operation for 10 seconds after

selecting the folder, then track search mode

will be cancelled.

Select the folder, and hold down the /SEL

key to start playback from the first track in

that folder.

While the file is selected, press the 6

key

to return to the previous operation.

While the file is selected, hold down the 6

key to cancel track search mode.

If there is no operation for five seconds after

selecting the file, that file is played back.

Disc operations such as selecting a track will

cancel track search mode.

For pleasant driving

5-25

OCZE14E3

Summary of Contents for LANCER EVOLUTION











































































































































































































































































































































Search results

Summary of Contents for LANCER EVOLUTION

Reviews:

Related manuals for LANCER EVOLUTION

Brands by name

Popular brands

Mitsubishi MOTORS LANCER EVOLUTION, Owner'S Manual

Search results

Summary of Contents for LANCER EVOLUTION

Reviews:

Related manuals for LANCER EVOLUTION

Brands by name

Popular brands