Mitsubishi MOTORS LANCER EVOLUTION Owner'S Manual Download Page 107

Page: 107 / 330

2. Lightly press the multi-information meter

switch to select “AVG UNIT (fuel consump-

tion display setting)”.

3. Press and hold the multi-information meter

switch for about 2 seconds or more to dis-

play “AVG UNIT” (fuel consumption dis-

play unit setting).

4. Lightly press the multi-information meter

switch to switch in sequence from km/L →

L/100 km → mpg (US) → mpg (UK) → RE-

TURN → km/L.

5. Press and hold the multi-information meter

switch for about 2 seconds or more to change

the setting to the selected unit.

NOTE

The display units for the driving range, the

average fuel consumption, the average speed

and the momentary fuel consumption are

switched, but the units for the indicating nee-

dle (speedometer), the odometer and the trip-

meter will remain unchanged.

The memory of the unit setting is erased if

the battery is disconnected, and it returns au-

tomatically to L/100 km.

The distance and speed units are also switched in

the following combinations to match the selected

fuel consumption unit.

Fuel consump-

tion

Distance (driv-

ing range)

Speed (average

speed)

L/100 km

km/h

mpg (UK)

mile (s)

mph

mpg (US)

mile (s)

mph

km/L

km/h

Changing the temperature unit

E00523100567

The display unit for temperature can be switched.

1. Press and hold the multi-information meter

switch for about 2 seconds or more to switch

from the setting mode screen to the menu

screen.

Refer to “Changing the function settings

(when the ignition switch is “ON”)” on page

3-15.

2. Lightly press the multi-information meter

switch to select “ ” (temperature unit set-

ting).

3. Press and hold the multi-information meter

switch for about 2 seconds or more to switch

in sequence from °C → °F → °C.

The setting is changed to the selected tem-

perature unit.

NOTE

If the battery is disconnected, the unit setting

is erased from memory and is automatically

set to °C.

Changing the display language

E00523200630

The language of the multi-information display can

be switched.

1. Press and hold the multi-information meter

switch for about 2 seconds or more to switch

from the setting mode screen to the menu

screen.

Refer to “Changing the function settings

(when the ignition switch is “ON”)” on page

3-15.

Instruments and controls

3-17

OCZE14E3

Summary of Contents for LANCER EVOLUTION











































































































































































































































































































































Search results

Summary of Contents for LANCER EVOLUTION

Reviews:

Related manuals for LANCER EVOLUTION

Brands by name

Popular brands

Mitsubishi MOTORS LANCER EVOLUTION, Owner'S Manual

Search results

Summary of Contents for LANCER EVOLUTION

Reviews:

Related manuals for LANCER EVOLUTION

Brands by name

Popular brands