Mitsubishi MOTORS LANCER EVOLUTION Owner'S Manual Download Page 213

Page: 213 / 330

Play the first 10 seconds of each of the tracks on

the whole USB device in order.

NOTE

Press this button again during playback if

you wish to hear that track, and that track

will play normally.

Folder Scan Playback

Hold down the PTY/SCAN key.

Play the first 10 seconds of the first track in each

folder on the USB device in order.

NOTE

Press this button again during playback if

you wish to hear that track, and that track

will play normally.

Search Tracks

Search folders and files, and select a track.

1. Turn the /SEL key to select the folder.

2. Press the /SEL key.

Files within the selected folder are displayed.

3. Turn the /SEL key to select the file.

4. Press the /SEL key.

This plays the selected file (track).

NOTE

While the folder is selected, press the 6

key to cancel track search mode.

If there is no operation for 10 seconds after

selecting the folder, then track search mode

will be cancelled.

Select the folder, and hold down the /SEL

key to start playback from the first track in

that folder.

While the file is selected, press the 6

key

to return to the previous operation.

While the file is selected, hold down the 6

key to cancel track search mode.

If there is no operation for five seconds after

selecting the file, that file is played back.

Operations such as selecting a track will can-

cel track search mode.

Listen to Bluetooth Audio*

E00736700077

This product can play back tracks on commercial-

ly-available Bluetooth-capable audio devices.

CAUTION

Never hold these devices in your hand to

operate while driving, as this is danger-

ous.

Do not leave the Bluetooth audio device

unattended in the vehicle.

Depending on how the devices are han-

dled, audio files being damaged or lost,

therefore it is recommended that data be

backed up.

NOTE

Depending on the type of Bluetooth-capable

audio devices, usage may not be possible, or

functions that can be used may be restricted.

Confirm together with the user manuals for

the commercially- available Bluetooth-capa-

ble audio devices.

Depending on the type of Bluetooth-capable

audio devices, volume levels may differ.

There is the danger of loud volumes, so prior

to use, it is recommended that you turn the

volume down.

→ “Adjust Volume” on page 5-17

Depending on the status of the Bluetooth au-

dio device, it may take some time until the

device is recognized, or playback starts.

For pleasant driving

5-29

OCZE14E3

Summary of Contents for LANCER EVOLUTION











































































































































































































































































































































Search results

Summary of Contents for LANCER EVOLUTION

Reviews:

Related manuals for LANCER EVOLUTION

Brands by name

Popular brands

Mitsubishi MOTORS LANCER EVOLUTION, Owner'S Manual

Search results

Summary of Contents for LANCER EVOLUTION

Reviews:

Related manuals for LANCER EVOLUTION

Brands by name

Popular brands