Mitsubishi Electric PURY-HP144, Service Handbook

Page: 50 / 398

[2-7 Example System with an MA Remote Controller ]
HWE18220_GB
chapter 2 -
21
2 Restrictions
2-7-5 System with a Connection of System Controller to Indoor-Outdoor
Transmission Line
(1) Sample control wiring
(2) Cautions
1) ME remote controller and MA remote controller cannot both be con-
nected to the same group of indoor units.
2) No more than 2 MA remote controllers can be connected to a group
of indoor units.
3) Do not connect the terminal blocks (TB5) on the indoor units that are
connected to different outdoor units with each other.
4) Replacement of male power jumper connector (CN41) must be per-
formed only on one of the outdoor units.
5) Provide grounding to S terminal on the terminal block for transmis-
sion line for centralized control (TB7) on only one of the outdoor
units.
6) A maximum of three system controllers can be connected to the in-
door-outdoor transmission line. (AE-200, AG-150A, GB-50ADA, or
G(B)-50A are not connectable.)
7) When the total number of indoor units exceeds 20 (12 if one or more
indoor units of the 72 model or above is connected), it may not be
possible to connect a system controller to the indoor-outdoor trans-
mission line.
8) When the number of the connected indoor units is as shown in the
table below, one or more transmission boosters (sold separately)
are required.
To connect two transmission boosters, connect them in parallel.
(Observe the maximum number of connectable indoor units that are
listed in the specifications for each outdoor unit.)
Œ
The table above shows the number of transmission boosters that is
required by the system with three BC controllers. For each BC con-
troller added or subtracted, subtract or add two indoor units.
Œ
Refer to the DATABOOK for further information about how many
booster units are required for a given system.
(3) Maximum allowable length
1) Indoor/outdoor transmission line
Maximum distance (1.25mm
2
[AWG16] or larger)
L11+L12 200m [656ft]
L21+L22 200m [656ft]
L25 200m [656ft]
2) Transmission line for centralized control
L31+L21 200m [656ft]
3) MA remote controller wiring
Same as 2-7-1
4) Maximum line distance via outdoor unit
(1.25mm
2
[AWG16] or larger)
L25+L31+L12(L11) 1000 m [3280ft] (500 m [1640ft])
*1
L12(L11)+L31+L22(L21) 1000 m [3280ft] (500 m [1640ft])
*1
*1 If a given system includes one or more unit or remote controller
that does not support the maximum allowable cable distance of
1000 m [3280 ft], the maximum allowable cable distance in the
system will be 500 m [1640 ft]. Refer to the latest catalog for in-
formation on which units and remote controllers support the max-
imum allowable cable distance of 1000 m [3280 ft].
IC
TB5
S
TB15
1 2
01
IC
TB5
S
TB15
1 2
02
A
1 B
2
MA
A
1 B
2
MA
LC
TB5
S
07
IC
TB5
S 1 2
TB15
IC
TB5
S
TB15
1 2
05 04
LC
TB5
S
08
IC
TB5
S
TB15
1 2
03
A
1 B
2
MA
IC
TB5
S
TB15
1 2
06
A
1 B
2
MA
A
1 B
2
MA
Group Group Group
Group Group
m3
Interlock operation with
the ventilation unit
OC
Connect
m2
m1
Note1 LM adapters cannot be connected to the
indoor-outdoor transmission line.
TB3
TB7
S
51
OS
TB3
TB7
S
52
OC
TB3
TB7
S
55
OS
TB3
TB7
S
56
L31
A B S
L25
M2 M1 M2 M1
M2 M1 M2 M1
M2 M1
M2 M1 M2 M1 M2 M1 M2 M1
M2 M1 M2 M1
M2 M1 M2 M1
M2 M1 M2 M1
M2 M1
M2 M1
M2 M1
Not
Connect
Not
Connect
Not
Connect
CN41 CN40 Replace
SW5-1 OFF ON
SW5-1 OFF ON
Leave the male
connector on
CN41 as it is.
SW5-1 OFF ON
Leave the male
connector on
CN41 as it is.
SW5-1 OFF ON
Leave the male
connector on
CN41 as it is.
System controller
Note1
S
BC
TB02
53
S
BC
TB02
57
L22
L21
L12
L11
Number of transmission boost-
er (sold separately) required
1 unit 2 units
When the P72 and P96 models are not
included in the connected indoor units
27 - 50 units -
When the P72 and P96 models are in-
cluded in the connected indoor units
21 - 39 units 40 - 50 units