Mitsubishi Electric MELDAS 60 Series, Parameter Manual

Page: 352 / 443

8. Spindle Parameters
8.3 MDS-B-SP/SPH, MDS-C1-SP/SPH
II - 256
No. Items Details
Setting
range
Standard
setting
3332 SP132 PGC3 Third position
loop gain for
cutting on
C-axis Set the position loop gain when the third gain
is selected for C-axis cutting. 1 to 100
(1/s) 15
3333 SP133 PGC4 Stop position
loop gain for
cutting on
C-axis Set the position loop gain for stopping when
carrying out C-axis cutting. 1 to 100
(1/s) 15
3334
(PR)
SP134 VGCP0 C-axis
non-cutting
speed loop
gain
proportional
item
Set the speed loop proportional gain in
C-axis non-cutting mode. 0 to 5000
(1/s) 63
3335
(PR)
SP135 VGCI0 C-axis
non-cutting
speed loop
gain integral
item Set the speed loop integral gain in C-axis
non-cutting mode. 0 to 5000
(0.1 1/s) 60
3336
(PR)
SP136 VGCD0 C-axis
non-cutting
speed loop
gain delay
advance item
Set the speed loop delay advance gain in
C-axis non-cutting mode.
When this parameter is set to "0", PI control
is exercised. 0 to 5000
(0.1 1/s) 15
3337
(PR)
SP137 VGCP1 First speed
loop gain
proportional
item for
C-axis cutting
Set the speed loop proportional gain when
the first gain is selected for C-axis cutting. 0 to 5000
(1/s) 63
3338
(PR)
SP138 VGCI1 First speed
loop gain
integral item
for cutting on
C-axis Set the speed loop integral gain when the
first gain is selected for C-axis cutting. 0 to 5000
(0.1 1/s) 60
3339
(PR)
SP139 VGCD1 First speed
loop gain
delay
advance item
for cutting on
C-axis
Set the speed loop delay advance gain when
the first gain is selected for curing on the
C-axis.
When this parameter is set to "0", PI control
is applied. 0 to 5000
(0.1 1/s) 15
3340
(PR)
SP140 VGCP2 Second
speed loop
gain
proportional
item for
cutting on
C-axis
Set the speed loop proportional gain when
the second gain is selected for C-axis
cutting.
0 to 5000
(1/s) 63