Mitsubishi Electric MELDAS 60 Series, Parameter Manual

Page: 158 / 443

5. Base Specifications Parameters
II - 62
# Items Details Setting range (unit)
aux11
(bit2)
Measures
against tool
setter chattering Select a condition where a relieving operation
completes after measurement with tools.
0: Sensor signals has stopped for 500 ms or
longer.
1: 100
μ
s or longer has passed after sensor
signals stopped.
0/1
aux11
(bit3)
Absolute
coordinate
switching (nose
R)
[Special display
unit compatible] Select whether to display a tool nose position or
coordinate value with the absolute coordinate
counter.
0: Displays the tool nose position.
1: Displays the position specified by program
command.
0/1
aux11
(bit4)
Program
address check Specify whether to simply check the program
address when the machining program is executed.
0: Don't check the program address.
1: Check the program address.
0/1
aux11
(bit5)
Spindle rotation
speed clamp Specify whether to clamp the rotation in constant
surface speed mode when the spindle rotation
speed clamp command is issued.
0: Clamp the rotation regardless of the constant
surface speed mode.
1: Clamp the rotation only in constant surface
speed mode.
0/1
aux11
(bit6)
Word edit menu Select the word edit menu format.
Set 0 in this parameter to select the following
menu format:
LOOK UP DELETE REPLACE INSERT
MENU
COPY PROGRAM MENU
SEARCH B.G. SRH B.G. END COMMENT RETURN
WORD
↓
WORD
↑
STR
↓
STR
↑
RETURN
Set 1 in this parameter to select the following men
COPY PROGRAM
MENU
LOOK UP DELETE
REPLACE
INSERT
MENU
SEARCH B.G. SRH B.G. END COMMENT RETURN
WORD
↓
WORD
↑
STR
↓
STR
↑
RETURN
0/1