Mitsubishi Electric MELDAS 60 Series, Parameter Manual

Page: 132 / 443

5. Base Specifications Parameters
II - 36
# Items Details Setting range (unit)
1090 Lin_RT Linear rotary
axis Specify how to handle a command for the rotary axis
that exceeds 360°.
0: For absolute value commands that exceed
360°‚ the value will be converted into a
remainder of 360° and the axis will move.
Example: If the command is 420°‚ the applied
value will be 60°.
1: For absolute value commands that exceed
360°‚ the axis will move in the same manner
as a linear axis.
Example: If the command is 420°‚ the axis will
pass the 360° position and will
move to the 60° position.
0/1
1091 Mpoint Ignore
middle point Specify now to handle the middle point during G28
and G30 reference point return.
0: Move to the reference point after passing the
middle point designated in the program.
1: Ignore the middle point designated in the
program and move straight to the reference
point.
0/1
1092 Tchg _A Replace
tools for
additional
axis
Specify the movement of the additional axis during
tool change position return.
0: The additional axis does not move with the
tool change position return command.
1: After returning the standard axis with the tool
change position return command‚ the
additional axis also returns to the tool change
position.
0/1
1093 Wmvfin Inter-system
waiting
method Specify the method for waiting between systems
when using two systems.
When the movement command is found in the wait
command (!, M) block:
0: Wait before executing movement command
1: Wait after executing movement command
0/1
1094 Tl_SBK
(for L
system
only)
Select life
count for
single block Select whether to count the data units to be used for
a single block when using the tool life management II
function (L system).
0: Does not count the data units.
1: Count the data units.
0/1