Mitsubishi Electric M70V Series, Connection Manual

Page: 211 / 250

Appendix 1 Cable
MITSUBISHI CNC
186
Appendix 1.34 G395 Cable
Max. cable length: 10m
Application: Optical communication cable
for wiring between drive units (outside panel)
for wiring between NC-drive units
Use when wiring outside of the panel with a cable of 10m or less.
(Note 1) Binding the cables too tight with tie-wraps could result in an increased loss or a disconnection. Use a
cushioning material such as a sponge or rubber when bundling the cables and fix so that the cables do not
move. Recommended clamp material: CKN-13SP KITAGAWA INDUSTRIES.
(Note 2) Never bundle the cables with vinyl tape. The plasticizing material in the vinyl tape could cause the POF cable
to break.
(Note 3) Loop the excessive cable with twice or more than the minimum bending radius.
[OPT]
Connector: PF-2D103
Recommended manufacturer:
Japan Aviation Electronics
Wire material: ESCA Premium
Recommended manufacturer:
MITSUBISHI RAYON
Cable Minimum bending radius: R
2-core cable (section with reinforced sheath) 50mm
2-core cable (section without reinforced sheath) 30mm
OPT OPT
Section with
reinforced sheath
Section without reinforced sheath
OPT
1
2
OPT
1
2