Mitsubishi Electric E80 Series, Maintenance Manual

Page: 65 / 212

M800/M80/E80 Series Maintenance Manual
1 System Basic Configuration
38 IB-1501273-F
 Example of alarm display (MCP alarm)
(1) Axis bit of the spindle in which the operation error has occurred is not displayed.
(2) The data ID error or the axis No. of the received frame No. error for [Y02 System alarm 0051] or [Y02 Aux ax system
alarm 0051] is not displayed.
 Example of alarm display (MCP warning)
(1) Axis bit of the spindle in which the operation error has occurred is not displayed.
Alarm/Warning code
Displays of 7-segment LEDs (transition)
1L 1R 2L 2R 3L 3R
Y02 SV commu er 0051 0004
1L 1R 2L 2R 3L 3R
System alarm Error # (lower 2
digits)
Error code
Y03 Drive unit unequipped XYZS
1L 1R 2L 2R 3L 3R
Drive unit unequipped Axis bit No meaning
Y05 Initial parameter error 1039
1L 1R 2L 2R 3L 3R
Initial parameter error Parameter #
(lower 2 digits)
No meaning
Y06 mcp_no setting error
1L 1R 2L 2R 3L 3R
mcp_no setting error No meaning No meaning
Y02 Aux ax system alarm 0051 0004
1L 1R 2L 2R 3L 3R
mcp_no setting error No meaning No meaning
Y03 Aux ax drive unit unequipped 0001
1L 1R 2L 2R 3L 3R
mcp_no setting error No meaning No meaning
Alarm/Warning code
Displays of 7-segment LED (transition)
1L 1R 2L 2R 3L 3R
Y51 Parameter stapt1-4 illegal 0012 Z
1L 1R 2L 2R 3L 3R
Parameter error Error # (lower 2 digits) Axis bit
Y90 No spindle signal 0003
1L 1R 2L 2R 3L 3R
No spindle signal Open-phase bit No meaning
Note
Note