Mitsubishi Electric E80 Series, Maintenance Manual

Page: 156 / 212

M800/M80/E80 Series Maintenance Manual
4 Failure Diagnosis
129 IB-1501273-F
4.13 IP Address Resetting Procedure at Disabled Network Communication
[M800W/M80W Series Only]
4.13.1 Connectable Control Unit IP Address List Screen
After NC starts, when the communication between the control unit and the display unit cannot be established even after the
time-out time passes, the connectable control unit IP address list screen appears. The contents of IP address list screen is
displayed in English.
If no IP address is displayed, check whether there are any loose or disconnected cables, hardware breakdowns, etc.
(*1) Up to ten lines are displayed at a time. When the display item exceeds ten lines, the following lines can be displayed
with the Page down key.
Display Items
Display Items Description
(1) Connect NC address This displays IP address of the connection destination control unit.
(2) PC IP address
PC Subnet
PC Gateway This displays IP address, subnet mask, gateway settings.
(3) IP address This displays IP address of the connectable control unit. (*1)
(4) System Version This displays system version of the connectable control unit. (*1)
(5) Serial No. This displays serial No. of the connectable control unit. (*1)
Connect NC address: 192.168.100.1
PC IP address : 192.168.100.2
PC Subnet : 255.255.255.0
PC Gateway : 192.168.100.1
NC Communication Error
IP address System Version Serial No.
10.97.37.86
XXX-XXXXXXXX-XX XXXXXXXXXXX
(2)
(3)
(4)
(5)
(1)