M800/M80/E80 Series Maintenance Manual
4 Failure Diagnosis
109
IB-1501273-F
(*1) Decimal, hexadecimal, floating point data and character string data writing is possible. Note that hexadecimal, floating
point data and character strings may not be settable depending on the data.
Decimal: Integers without decimal points (Example) -1234
Hexadecimal: An "H" is necessary at the end (Example) 1234H
Floating point data: Data with a decimal point (Example) -12.3
Character string data: Character string (Example) X
Menus
Menus
Details
This erases the information in the line where the cursor is. (One entire line becomes blank.) The cursor
does not move at this time.
The contents of the set address data (Part system No, Section/sub-section/axis) for all the lines are con-
stantly displayed.
The Index No. highlight (indicating data is being set) is released.
The cursor appears in "Part system No" of that line.
This writes the data in the setting area to the NC memory indicated by address data at the cursor posi-
tion. (*1)
The Data No. highlight (indicating data is being set) is released, and constant display is started.
After writing, the cursor moves to "Part system No" of the next line.
Based on the data of the address data where the cursor is, this displays the continuous data to which
the sub-section No. has been added to the address data from the line where the cursor is.
The cursor moves to "Part system No " of that line.
Based on the data of the address data where the cursor is, this displays the continuous data to which
the axis No. has been added to the address data from the line where the cursor is.
The cursor moves to "Part system No " of that line.
Line
clear
Data
read
Data
write
Subsect
continu
Axis
continu
Summary of Contents for E80 Series
