manualshive.com logo in svg

Mitsubishi Electric E80 Series, Maintenance Manual

The Mitsubishi Electric E80 Series Maintenance Manual is a comprehensive guide to assist users in properly maintaining their product. This manual is available for free download from our website, providing easy access to essential information and instructions. Stay informed and keep your E80 Series in top-notch condition!

Share
Download
background image

M800/M80/E80 Series Maintenance Manual
4 Failure Diagnosis

101

IB-1501273-F

SP sync err +P (deg)

This displays the maximum value of the angle at which the synchronized spindle advanc-
es beyond the reference spindle during spindle synchronization I, tool spindle synchroni-
zation IA/IB, or tool spindle synchronization II. (±99999.999 deg)

SP sync err -P (deg)

This displays the maximum value of the angle at which the synchronized spindle lags be-
hind the reference spindle during spindle synchronization I, tool spindle synchronization 
IA/IB, or tool spindle synchronization II. (±99999.999 deg)

SP syn err P-P (deg)

This displays the synchronous error width between the reference spindle and the syn-
chronized spindle during spindle synchronization I, tool spindle synchronization IA/IB, or 
tool spindle synchronization II. (±99999.999 deg)

SP syn phas er (deg)

This displays the phase difference stored in the memory by calculating the phase shift 
value. (±99999.999 deg)

SP sync ph1 FB (deg)

This displays the current value of the feedback phase difference that includes the phase 
difference stored in the memory by calculating the phase shift value during spindle syn-
chronization I, tool spindle synchronization IA/IB, or tool spindle synchronization II. 
(±99999.999 deg)

SP sync ph2 FB (deg)

This displays the current value of the feedback phase difference that does not include the 
phase difference stored in the memory by calculating the phase shift value during spindle 
synchronization I, tool spindle synchronization IA/IB, or tool spindle synchronization II. 
(±99999.999 deg)

SP syn er comp (deg)

This displays the error compensation amount during spindle synchronization I, tool spin-
dle synchronization IA/IB, or tool spindle synchronization II. (±99999.999 deg)

GB sync error (deg)

This displays the current value of the synchronous error between the reference spindle 
and the guide bushing spindle during guide bushing spindle synchronization. 
(±99999.999 deg)

GB sync err +P (deg)

This displays the maximum value of the distance in which the guide bushing spindle ad-
vances beyond the reference spindle during guide bushing spindle synchronization. 
(±99999.999 deg)

GB sync err -P (deg)

This displays the maximum value of the distance in which the guide bushing spindle lags 
behind the reference spindle during guide bushing spindle synchronization. (±99999.999 
deg)

GB sync err P-P (deg)

This displays the synchronous error width between the reference spindle and the guide 
bushing spindle during guide bushing spindle synchronization. (±99999.999 deg)

Motor temp. (°C)

This displays the motor temperature.

Power cycles (p)

This displays the power cycle counter. (Number of times)

Insul resist. (MOhm)

The insulation degradation status is displayed.

FAN1 rot. state (%)

The detected rotation speed of the unit cooling fan is displayed by converting it into per-
centage format (converted with the rated speed of the fan as 100%).

FAN2 rot. state (%)

The detected rotation speed of the unit cooling fan is displayed by converting it into per-
centage format (converted with the rated speed of the fan as 100%).

Battery voltage (V)

This displays the battery voltage.

Control input 1L

This indicates the control signal input from NC to spindle. (bit0 to bit7)
Bit0: READY ON command
Bit1: Servo ON command
Bit7: Alarm reset command

Control input 1H

This indicates the control signal input from NC to spindle. (bit8 to bitF)
Bit8 to BitA: Torque limit selection command

Control input 2L

This indicates the control signal input from NC to spindle. (bit0 to bit7)

Control input 2H

This indicates the control signal input from NC to spindle. (bit8 to bitF)
Bit9: Speed monitor command valid
BitA: In door closed (controller)
BitB: In door closed (all drive unit)

Control input 3L

This indicates the control signal input from NC to spindle. (bit0 to bit7)

Control input 3H

This indicates the control signal input from NC to spindle. (bit8 to bitF)

Control input 4L

This indicates the control signal input from NC to spindle. (bit0 to bit7)
Bit0 to Bit2: Spindle control mode selection command
Bit4: In gear changeover command
Bit5 to Bit6: Gear selection command

Display items

Details

Summary of Contents for E80 Series





















































































































































































































Reviews:

No comments

Related manuals for E80 Series

unicore UM960 Installation And Operation User Manual preview
UM960
Brand: unicore Pages: 25
unicore UM960L Installation And Operation User Manual preview
UM960L
Brand: unicore Pages: 24
1Control Solo Technical Sheet preview
Solo
Brand: 1Control Pages: 8
Yardney Synergy Quick Start Manual preview
Synergy
Brand: Yardney Pages: 8
dbx DriveRack PA User Manual preview
DriveRack PA
Brand: dbx Pages: 52
Hankscraft Runxin HS Series Service Manual preview
HS Series
Brand: Hankscraft Runxin Pages: 58
Feig Electronic ID ISC.MR102 Manual preview
ID ISC.MR102
Brand: Feig Electronic Pages: 153
GCE S 400 Operating Instructions Manual preview
S 400
Brand: GCE Pages: 24
Rachio IRO Installation Manual preview
IRO
Brand: Rachio Pages: 2
Rabbit RCM2000 Getting Started Manual preview
RCM2000
Brand: Rabbit Pages: 38
J+J J4C S20 Quick Start Manual preview
J4C S20
Brand: J+J Pages: 4
Val Controls I 24-AF Series Replacement Manual preview
I 24-AF Series
Brand: Val Controls Pages: 6
Vag RIKO Operating And Maintenance Instructions Manual preview
RIKO
Brand: Vag Pages: 12
G-Force UNDER CONTROL CP-30A PILOT User Manual preview
UNDER CONTROL CP-30A PILOT
Brand: G-Force Pages: 2
Hiwin RC4 Original Instruction preview
RC4
Brand: Hiwin Pages: 99
TeleMann DTR5000N Manual preview
DTR5000N
Brand: TeleMann Pages: 4
Procom DGC-6D Operating Instructions Manual preview
DGC-6D
Brand: Procom Pages: 10
ShoreStation SSV40120EDC Service Manual preview
SSV40120EDC
Brand: ShoreStation Pages: 15

Brands by name

Popular brands

Load more brands