Mitsubishi Electric E80 Series, Maintenance Manual

Page: 44 / 212

M800/M80/E80 Series Maintenance Manual
1 System Basic Configuration
17 IB-1501273-F
1.3.2 Option Display Screen
Select the menu [Option] on the diagnosis (Diagn) screen to display the contents of the additional specifications registered
in the NC.
The additional specification items are displayed by name. If all of the additional specifications cannot be seen in one screen,
the rest of items can be displayed by pressing the page up/down keys.
(6) PLC ladder file
list
This displays the file name, file label, execution type for each PLC lad-
der program.
Use / keys to change the pages and refer it.
(a) Registration No. This displays the registration No. of
each PLC program file. The total number of regis-
tration size and target file
to be executed for all proj-
ects is as follows:
M800W/M800S: 120
M80W/M80/E80: 60
(b) File name This displays the file name of PLC pro-
gram file.
(data of GX Developer/GX Woks2) Max. 8 characters
(c) File label This displays this file label of PLC pro-
gram file.
(data of GX Developer/GX Woks2) Max. 32 characters
(d) Execution type This displays the execution type of
PLC program.
HIGH: High-speed PLC program
MIDDLE: Middle-speed PLC program
INTIAL: Initial state of PLC program
WAIT: Standby PLC program
LOW: Low-speed PLC program
(blank): Not the target of the execution.
Menus
Menus Details
This displays the software list.
This displays the hardware list.
This displays the PLC program list (file name, file label, and execution type).
Display items
Display items Details
(1) Option items The list of currently usable additional specifications is displayed.
As for the currently usable items, the background color is displayed in blue.
The items set when the power supply was turned ON can be currently used.
Display items Details Remarks
S/W
config
H/W
config
Ladder
config
Diagn