Mindray BeneView T5, Service Manual

Page: 59 / 206

3-27
3.10 Network Print Test
Note
z
HP LaserJet 1505n or 2035n laser printer is recommended for BeneView series of
patient monitors.
Tools required:
„ Hub and network cable
3.10.1 Equipment Connection and Setup
1 Connect the patient monitor and network printer to a HUB using common network
cables as follows:
2 Set IP address as follows: Select [ Main Menu ] → [ Maintenance >> ] → [ User
Maintenance >> ] → enter the required password → [ IP Address Setup >> ] and set the
IP address of the patient monitor in the same network segment with that of the network
printer. (See the instructions for use accompanying the printer)
3 Search for printer by selecting [ Main Menu ] → [ Print Setup >> ] → [ Printer Setup
>> ] → [ Search Printer ]. After a while, the printer’s model and IP address will appear in
the box beside [ Printer ].
3.10.2 Print Function Test
1 Enter the Demo mode of the patient monitor.
2 Select [ Main Menu ] → [ Print Setup >> ] → [ Realtime Reports >> ] → [ Normal Report ]
and then select [ Print ]. The network printer shall print out the report correctly.
BeneView
monitor Network
printer
HUB
Cable Cable