Miele G 6994 Operating Instructions Manual Download Page 12 | Manualshive

Page: 12 / 116

background image

Warning and Safety instructions

12

Technical safety



Repairs and other work by unqualified persons could be

dangerous. Installation, maintenance work and repairs to electrical
appliances must only be carried out by a Miele approved service
technician.



Before installation, check the dishwasher for visible signs of

damage. Under no circumstances should you use a damaged
dishwasher. A damaged dishwasher could be dangerous.



The electrical safety of this appliance can only be guaranteed

when continuity is complete between it and an effective earthing
system. It is most important that this basic safety requirement is
present and regularly tested and, where there is any doubt, the
electrical system in the house should be checked by a qualified
electrician.
Miele cannot be held liable for the consequences of an inadequate
earthing system (e.g. electric shock).



Reliable and safe operation of this dishwasher can only be

assured if it has been connected to the mains electricity supply.



The dishwasher must only be plugged into the electricity supply

via a suitable switched socket. The electrical socket must be easily
accessible after the dishwasher is installed so that it can be
disconnected from the electricity supply at any time.



There must be no electrical sockets behind the dishwasher.

Danger of overheating and fire risk if the dishwasher were to be
pushed up against a plug.



The dishwasher must not be installed under a cooktop. The high

radiant temperatures which are sometimes generated by a cooktop
could damage the dishwasher. For the same reason, it should not be
installed next to open fires or other appliances which give off heat,
such as heaters etc.

«
...
10
11
12
13
14
...
»

Summary of Contents for G 6994





















































































































Reviews:

No comments

Related manuals for G 6994

Brand: Omega Pages: 32

Brand: Indesit Pages: 68

Brand: Hoover Pages: 17

Brand: Campomatic Pages: 36

Brand: Gaggenau Pages: 28

Brand: Hoover Pages: 36

Brand: HERKULES Pages: 20

Brand: Monogram Pages: 88

Brand: Hoover Pages: 88

Brand: Smeg Pages: 37

Monogram ZBD8920PSS

Brand: GE Pages: 32

Brand: UNITED Pages: 32

Brand: Bosch Pages: 20

WAE24063GB Series

Brand: Bosch Pages: 8

Brand: Bosch Pages: 32

Brand: Bosch Pages: 8

Brand: Bosch Pages: 8

Brand: Bosch Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands