Miele G 6994 Operating Instructions Manual Download Page 62

Page: 62 / 116

Programme options

Start at

With the

Start at

function, you set the

exact time at which you want the
programme to start.



Use the



arrow sensors to set the

hour and confirm with

The hour will be saved and the minute
number block will be highlighted.



Use the



arrow sensors to set the

minutes and confirm with

The display will change to show the
programme menu.



Close the door.

The left-hand TimeControl in-operation
indicator light will start flashing.

When the set time is reached, the
programme selected will begin
automatically.

Finish at

With the

Finish at

function, you set the

time at which you wish the programme
to end.



Use the



arrow sensors to set the

hour and confirm with

The hour will be saved and the minute
number block will be highlighted.



Use the



arrow sensors to set the

minutes and confirm with

The display will revert to the programme
menu and the estimated start time will
appear.



Close the door.

The left-hand TimeControl in-operation
indicator light will start flashing.

A message will appear in the display if
the programme cannot be completed
by the set finish time because it has too
long a running time.

The selected programme will start
automatically when the estimated start
time is reached.

Summary of Contents for G 6994





















































































































Search results

Summary of Contents for G 6994

Reviews:

Related manuals for G 6994

Brands by name

Popular brands

Miele G 6994, Operating Instructions Manual

Search results

Summary of Contents for G 6994

Reviews:

Related manuals for G 6994

Brands by name

Popular brands