Miele G 6994 Operating Instructions Manual Download Page 107

Page: 107 / 116

Settings menu

107

Change main menu

You can change the order of the
programmes in the programme
selection menu and also enter your
favourite programmes into the first two
programme places.



Select the programmes you want to
place in the first and second position
of the programme selection menu.



Confirm each position with

The programmes you have selected will
then appear together in the display.



If you are happy with the order in
which they are shown, confirm with



To change the order in which they are
shown, select

Change main menu

Enter the settings again.

Save extras

Additional programme options can be
added to some programmes, e.g.

Short

(see "Programme options - Extras").

You can use the

Save extras

option to

save settings you have chosen for a
particular programme so that they are
automatically selected when you run
the programme in the future.

The dishwasher is delivered with this
function deactivated.



Select the setting you want and
confirm with

Temperature

The temperature can be displayed in
°C/Celsius or °F/Fahrenheit.

The factory default setting is °C.



Select the option you want and
confirm with

Brightness

There are seven different display
brightness settings.



Select the brightness you want and
confirm this with

Summary of Contents for G 6994





















































































































Search results

Summary of Contents for G 6994

Reviews:

Related manuals for G 6994

Brands by name

Popular brands

Miele G 6994, Operating Instructions Manual

Search results

Summary of Contents for G 6994

Reviews:

Related manuals for G 6994

Brands by name

Popular brands