Mercedes-Benz SL 320, Operator'S Manual

Page: 51 / 161

51
Combination Switch
1. Low beam (exterior lamp
switch position )
2. High beam (exterior lamp
switch position )
3. High beam flasher (high beam
available independent of
exterior lamp switch position)
4. Turn signals, right
5. Turn signals, left
To signal minor directional changes,
such, as changing lanes on a highway,
move combination switch to the point
of resistance only and hold it there.
To operate the turn signals
continuously, move the combination
switch past the point of resistance (up
or down). The switch is automatically
canceled when the steering wheel is
turned to a large enough degree.
6. Press switch briefly:
One wipe without washer water
(select only if window is wet)
Press switch past resistance point:
Windshield washer,
windshield wiper;
headlamp cleaning system only in
exterior lamp switch positions
- or (except xenon
lamps).
Canada only: also in position
when the engine is running)
7. Windshield wiper
Wiper off
I Intermittent wiping
II Normal wiper speed
III Fast wiper speed
Note:
The windshield washer reservoir,
hoses and nozzles are automatically
heated.