Mercedes-Benz EQS, Operator'S Manual

Page: 411 / 565

%
The transmission may be locked in position
j
in the event of damage to the electrics. To
shi to
i
, provide the on-board electrical
system with power (
/
page 404).
*
NNOOTE TE Possible damage to the vehicle
when loading or unloading
When loading or unloading, the vehicle must
be raised to transport level.
If the transport settings are not shown or the
Vehicle not ready for loading
message is dis-
played, the vehicle may not be loaded or
unloaded.
#
If required, raise the vehicle to transport
level again.
#
A vehicle that cannot be raised to trans-
port level may not be loaded or unloaded
using a ramp. Consult a quali ed special-
ist workshop.
&
W WARNING ARNING Risk of accident due to activa-
ted transport level
If the vehicle is raised to transport level, driv-
ing and driving safety systems have only limi-
ted availability and the view from the vehicle is
restricted.
Driving safety is severely restricted and there
is a risk of an accident!
#
Do not use transport level in normal road
operation.
#
Only activate and use transport level to
load the vehicle and when not on public
roads.
#
Ensure that no persons or obstacles are
located in the area surrounding the vehi-
cle.
RRaising t aising the v he vehicle t ehicle to tr o transpor ansport lev t level el
#
Press the
G
button for at least ve sec-
onds.
#
Immediately press and hold the
a
button
for at least one second.
The For transport level, switch vehicle on
message is displayed.
#
Switch on the vehicle (
/
page 194).
The transport settings are displayed.
#
Swipe downward to select
Transport level
and
press
a
.
The vehicle is raised and the Vehicle rising…
Do not drive on ramp message is displayed
for 5 seconds. The raising process can last up
to 60 seconds and can be cancelled with the
G
button.
#
When raising, do not switch o the vehicle.
While the vehicle is being raised, you can
manoeuvre at a maximum speed of 40 km/h.
408 408 Breakdown assistance