Mercedes-Benz EQS, Operator'S Manual, Page: 425 / 565

R
Chock
R
Wheel wrench
R
Centring pin
%
The jack weighs approximately 3.4 kg.
The maximum load capacity of the jack can
be found on the sticker a xed to the jack.
The jack is maintenance-free. If there is a
malfunction, please contact a quali ed spe-
cialist workshop.
The tyre-change tool kit is located in tool bag
1
in the boot.
%
Depending on the vehicle equipment, the tool
bag may be located at other positions in the
boot.
The tool bag contains:
R
Jack
R
Gloves
R
Wheel wrench
R
Centring pin
R
Folding chock
R
Ratchet for jack
Pr Prepar eparing t ing the v he vehicle f ehicle for a wheel c or a wheel change hange
RReq equir uirements: ements:
R
The vehicle is not on a slope.
R
The vehicle is on solid, non-slippery and level
ground.
R
The required tyre-change tool kit is available.
%
If your vehicle is not equipped with the tyre-
change tool kit, consult a quali ed specialist
workshop to nd out about suitable tools.
#
Apply the electric parking brake manually.
#
Move the front wheels to the straight-ahead
position.
#
Shi the transmission to position
j
.
#
VVehicles wit ehicles with AIRMA h AIRMATIC: TIC: set the raised vehicle
level for greater ground clearance
(
/
page 277).
#
Switch o the vehicle.
#
Make sure that the vehicle cannot be started.
#
Place chocks or other suitable items under the
front and rear of the wheel that is diagonally
opposite the wheel you wish to change.
#
Unload the vehicle.
422 422 Wheels and tyres