Mercedes-Benz EQS, Operator'S Manual

Page: 166 / 565

Adaptive Highbeam Assist automatically switches
between the following types of light:
R
Low beam
R
High beam
At speeds greater than 30 km/h:
R
If no other road users are detected, the high
beam will switch on automatically.
The high beam will switch o automatically in the
following cases:
R
At speeds below 25 km/h
R
If other road users are detected
R
If street lighting is su cient
%
The system's optical sensor is located behind
the windscreen near the overhead control
panel.
Switc Switching A hing Adap daptiv tive Highbeam Assis e Highbeam Assistt on/o on/o
Switc Switching on hing on
#
Turn the light switch to the
Ã
position.
#
Switch on the high beam using the combina-
tion switch.
If Adaptive Highbeam Assist is activated,
the
_
indicator lamp will light up on the
driver display.
Switc Switching hing oo
#
Switch o the high beam using the combina-
tion switch.
AAdap daptiv tive Highbeam Assis e Highbeam Assist Plus t Plus
AAdap daptiv tive Highbeam Assis e Highbeam Assist Plus function t Plus function
&
W WARNING ARNING Risk of accident despite Adap-
tive Highbeam Assist Plus
Adaptive Highbeam Assist Plus does not react
to:
R
road users without lights, e.g. pedestrians
R
road users with poor lighting, e.g. cyclists
R
road users whose lighting is obstructed,
e.g. by a barrier
On very rare occasions, Adaptive Highbeam
Assist Plus may fail to recognise other road
users with their own lighting, or may recognise
them too late.
In these, or in similar situations, the automatic
high beam will not be deactivated or will be
activated despite the presence of other road
users.
#
Always observe the road and tra c con-
ditions carefully and switch o the high
beam in good time.
Light and sight 163 163