Mercedes-Benz EQS, Operator'S Manual

Page: 310 / 565

FFolding t olding the ball nec he ball neck out k out
#
Pull switch
2
until the ball neck unlocks.
The ball neck will fold out from under the rear
bumper.
Indicator lamp
1
will ash.
#
Pull the ball neck in the direction of the arrow
until it engages audibly in a vertical position.
Indicator lamp
1
on the ball neck release
switch will go out.
If the ball neck is not securely locked in place,
the message
Check trailer hitch lock
will
appear on the driver display.
#
Remove the cover cap from the ball head and
store it in a safe place.
Make sure that the ball on the ball neck is clean.
Check that it is either greased or dry (grease-
free), depending on the instructions for the trailer.
FFolding t
olding the ball nec he ball neck in k in
#
Pull switch
2
until the ball neck unlocks.
The ball neck will fold up under the rear
bumper.
Indicator lamp
1
will ash.
#
Push the ball neck in the direction of the
arrow until it engages audibly behind the
bumper.
Indicator lamp
1
will go out and the message
on the driver display will disappear.
Observe the information about the displays on the
driver display:
R
Indicator and warning lamps (
/
page 506)
R
Display messages (
/
page 441)
Driving and parking 307 307