Mercedes-Benz EQS, Operator'S Manual

Page: 226 / 565

%
If you cannot remove the charging cable con-
nector, unlock the vehicle and repeat the pro-
cedure. If the charging cable connector is still
locked, contact a quali ed specialist work-
shop.
%
Status display
1
indicator lamp remains lit
for some time a er charging cable connector
has been removed and then goes out.
#
Insert socket cover
4
into the lower vehicle
socket connection.
#
Close the socket ap.
FFunction of t unction of the c he charg harge lev e level displa el display in t y in the dr he driviver's er's
display display
%
The data shown in the illustration is example
data.
1
Range at current charge level
2
Current charge level of the high-voltage bat-
tery
3
Maximum charge level (depending on the set-
ting)
4
Time remaining until completely charged (until
the selected maximum charge level is
reached)
5
Charge level recommended by Range Assis-
tant to reach the next destination
6
Dynamic charge level display
7
Current charging capacity
%
Speci ed remaining range
1
may vary due to
di erent factors, e.g. driving style or topogra-
phy.
When the vehicle is connected to the mains sup-
ply and is switched o , the driver's display shows
the charge level display for approximately two
minutes.
%
The value of current charging capacity
7
can
di er from the display on the charging station.
At a charging capacity of 10 kW or higher, the
value in the charge level display is rounded o
and shown without a decimal place.
The value in
4
varies depending on the setting of
the charging process. It displays the charging pre-
diction, e.g. the time at which the selected charge
level will be reached or the charge level at the
pre-selected departure time.
Driving and parking 223 223