Mercedes-Benz EQS, Operator'S Manual

Page: 231 / 565

R
The vehicle as well as persons and objects are
located outside the range of movement of the
door.
#
Press the programming button on the door
drive unit.
Initiate the next step within approximately
30 seconds.
#
Press previously programmed button
1
,
2
or
3
repeatedly until the door closes.
When the door closes, programming is com-
pleted.
%
Please also read the operating instructions for
the door drive.
TTrroubleshoo oubleshooting when pr ting when progr ogramming t amming the r he remote emote
contr control ol
#
Check if the transmitter frequency of remote
control
5
is supported.
#
Replace the batteries in remote control
5
.
#
Hold remote control
5
at various angles from
a distance of 1 cm to 8 cm front of the inside
rearview mirror. You should test every position
for at least 25 seconds before trying another
position.
#
Hold remote control
5
at the same angles at
various distances in front of the inside rear
view mirror. You should test every position for
at least 25 seconds before trying another
position.
#
On remote controls that transmit only for a
limited period, press button
6
on remote
control
5
again before transmission ends.
#
Angle the aerial line of the garage door opener
unit towards the remote control.
%
It is possible that older garage doors cannot
be operated using the remote control in the
inside rearview mirror even a er you have
successfully performed the measures descri-
bed above. If this is the case, contact the
HomeLink
®
Hotline.
%
Support and additional information on pro-
gramming:
R
On the HomeLink ® Hotline on (0) 08000
466 354 65 or +49 (0) 6838 907-277
R
On the Internet at https://
www.homelink.com
Opening or closing t Opening or closing the g he gar arag age door e door
RReq equir uirements: ements:
R
The corresponding button is programmed to
operate the door.
#
Press and hold buttons
1
,
2
or
3
until the
door opens or closes.
#
If indicator lamp
4
ashes yellow a er
approximately 20 seconds: press and hold the
previously pressed button again until the door
opens or closes.
Clear Clearing t ing the g he gar arag age door opener memory e door opener memory
#
Press and hold buttons
1
and
3
.
Indicator lamp
4
lights up yellow.
#
If indicator lamp
4
ashes green: release
buttons
1
and
3
.
The entire memory has been deleted.
228 228 Driving and parking