Mercedes-Benz EQS, Operator'S Manual

Page: 413 / 565

Low Lower ering t ing the v he vehicle ehicle a er a er unloading unloading
#
Switch on the power supply.
#
Switch on the vehicle.
#
Swipe upward in the transport settings to
select Standard level and press
a
.
The vehicle is adjusted to the height of the last
active level and the Lowering vehicle message
is displayed.
#
A er the vehicle has been lowered, press the
G
button for at least two seconds.
The transport settings are closed.
TToowing ey wing eye st e stor orag age location e location
Towing eye
1
is located under the boot oor.
FFitting and r itting and remo emoving t ving the to he towing eye wing eye
#
Press cover
1
at top
2
inwards and
remove.
#
Screw in the towing eye clockwise as far as it
will go and tighten.
VVehicles wit ehicles with a tr h a trailer hitc ailer hitch: h: vehicles with a trailer
hitch do not have a rear bracket for the towing
eye. Fasten the tow bar to the trailer hitch.
#
Make sure that cover
1
engages in the
bumper when you remove the towing eye.
410 410 Breakdown assistance