Melco EMT 10/4, Installation, Operation And Maintenance Manual

Page: 84 / 130

Operation Manual for the EMT 10T, 10/4, and 10/4T Melco Embroidery Systems
4-8 Lubrication
5. When moveable frame, knife arm rear pin displays, press . This moves the x/y
axis to hoop center. Remove the rear bed cover (Figure 4-14). Refer to Figure 4-15 to lubricate
the trimmer moveable frame and knife arm rear pin. Press
when done. Replace
the rear bed cover.
6. When trimmer knife drive arm, front
pin displays, press . No motion
is required to lubricate the trimmer
knife drive arm and pin. Remove the
needle plate. Refer to Figure 4-16 to
lubricate the trimmer knife drive arm
and pin. Press
when done.
Replace the needle plate.
Figure 4-15
Put 1 drop of oil
at all four loca-
tions (moveable
frame)
Top view (with cover
removed)
▲
▲
Figure 4-16
Put 1 drop of
oil on each
location (knife
drive arm)
Top view (with
needle plate
removed)
▲
▲
Put 1 drop of oil
here (front pin)
Rear bed
cover
Figure 4-14
Put 1 drop of oil here
(knife arm rear pin)