Medit i700, User Manual

Page: 14 / 224

12 User Manual
Overcurrent
Sense (Charge) 10.0 A +5.0 / -4.0
Sense Delay 8.0 ms ± 1.6
Sense (Discharge) 10.0 A + 4.4 / -3.8
Sense Delay 8.0 ms ± 1.6
Current consumption at operating mode Max. 150.0 μA
The possible safety specifications are determined by the propulsion control module (PCM) in the parts list.
3.5 The Battery Usage Precautions and Disposal Guide
CAUTION
▪ Be sure to fully understand how to replace the battery before use.
▪ Use a charger suitable for the specified voltage and current.
▪ Do not attempt to reverse the charge. Reverse charging may increase the gas pressure inside the battery and cause the battery to leak.
▪ Do not attempt to recharge a fully charged battery. Repeated overcharging could result in battery performance degradation and overheating.
▪ Charging efficiency decreases at temperatures above +40°C (+104°F).
▪ Do not short-circuit the positive (+) and negative (-) terminals with metallic objects such as metal wires, necklaces, or chains.
▪ To avoid malfunction or damage, do not drop or throw the battery.
▪ Do not deform a battery by excessive pressure.
▪ Do not directly solder anything onto the battery pack.
▪ Do not allow children to change batteries without adult supervision.
▪ Do not dispose of the battery as general waste and separate it from recyclables.
▪ Do not dispose of or throw the battery into a fire. Heat can cause a battery explosion and a fire.
▪ Separate them from each other when disposing of the secondary batteries with different electrochemical systems.
▪ Dispose of the battery by discharging it to prevent heat from short-circuiting.
▪ Battery disposal methods may vary by country and region. Dispose of used batteries under local laws and regulations.
3.6 Updates in Medit Scan for Clinics
Medit Scan for Clinics automatically checks for updates when the software is in operation. If a new version of the software is released, the system will
automatically download it.
4. Safety Guide
Please adhere to all the safety procedures as detailed in this User Guide to prevent human injury and equipment damage. This document uses the words
WARNING and CAUTION when highlighting precautionary messages.
Carefully read and understand the guidelines, including all preventive messages as prefaced by the words WARNING and CAUTION. To avoid bodily injury
or equipment damage, make sure to adhere strictly to the safety guidelines. All instructions and precautions as specified in the Safety Guide must be
observed to ensure the system’s proper functionality and personal safety.
The i700 wireless system should only be operated by dental professionals and technicians who are trained to use the system. Using the i700 wireless
system for any purpose other than its intended usage as outlined in the section “1.1 Intended Use” may result in injury or damage to the equipment.
Please handle the i700 wireless system according to the guidelines in the safety guide.
4.1 System Basics
The i700 wireless system is a high-precision optical measuring device. Acquaint all the following safety and operating instructions before the installation,
usage, and operation of i700 wireless.
CAUTION
▪ The USB 3.0 cable connected to the wireless hub is the same as a standard USB cable connector. However, the device may not operate normally
if a standard 3.0 USB cable is used with i700 wireless.
▪ The wireless hub is designed specifically for the i700 wireless and should not be used with any other device.
▪ This device has been assessed for conformity for use in business environments. When used in residential environments, there is a risk of radio
wave interference.
▪ If the product has been stored in a cold environment, give it time to adjust to the temperature of the environment before use. If used
immediately, condensation may occur, which may damage the electronic parts inside the unit.
▪ Ensure that all components provided are free from physical damage. Safety cannot be guaranteed if there is any physical damage to the unit.
▪ Before using the system, check that there are no issues such as physical damage or loose parts. If there is any visible damage, do not use the
product and contact the manufacturer or your local representative.
▪ Check the i700 wireless handpiece and its accessories for any sharp edges.
▪ When not in use, the i700 wireless system should be kept mounted on a desk stand or a wall mount stand.
▪ Do not install the desk stand on an inclined surface.
▪ Do not place any object on the i700 wireless system.
▪ Do not place the i700 wireless system on any heated or wet surface.
▪ Do not block the air vents located at the rear of the i700 wireless system. If the equipment overheats, the i700 wireless system may
malfunction or stop working.
▪ The battery of the i700 wireless can only be compatible with the i700 wireless system.
▪ Do not touch the charging terminals of the rechargeable battery with your hands or other instruments.
▪ If the charging terminal of the rechargeable battery is damaged, do not use it and contact the manufacturer or regional manager.
▪ If the shape of the rechargeable battery has been deformed by dropping or physical damage, never use it, and contact
the manufacturer or regional manager.
▪ Extension cable battery is not designed for charging. Do not attempt to charge it with the battery charger.
▪ Use only the extension cable battery provided by the manufacturer.
▪ Do not spill any liquid on the i700 wireless system.
▪ The i700 wireless handpiece and other included components are made of electronic components. Do not allow any kind of liquid or foreign
objects to enter.
▪ Do not pull or bend the cable connected to the i700 wireless system.
▪ Carefully arrange all the cables so that you or your patient do not trip or get caught in the cables. Any pulling tension on the cables
may cause damage to the i700 wireless system.
▪ Always place the plug of the power cord of the i700 wireless system in an easily accessible location.
▪ Always keep an eye on the product and your patient while using the product to check for abnormalities.
▪ Proceed with calibration, cleaning, disinfection, and sterilization in accordance with the contents of the user guide.
▪ If you drop the i700 wireless tip on the floor, do not attempt to reuse it. Discard the tip immediately as there is a risk that the mirror attached to
the tip may have been dislodged.
▪ Due to its fragile nature, the i700 wireless tips should be handled with care. To prevent damage to the tip and its internal mirror, be