Master MAS4A009, User Manual

Page: 52 / 79

EN
FOlDING YOUR LEG TRAINER FOR STORAGE
a) Place the Handlebar Assembly in storage position. To do so, loosen the Adjustment Knob by turning it
counter-clockwise. Then pull it out and align the top hole in the Handlebar ssembly with the Adjustment
Knob Pin, release the knob and tighten by turning clockwlse.
b) While standing in front of the Leg Trainer loosen the Locking knob at the bottom of the Support Tube
Assembly by turning 2 full turns counter-clockwise.
c) Carefully raise the Right Rait End to an upward position while holding the Handlebar Assembly.
Hold this rail end in place while lifting the left rail end to an upright position.
NOTE: allow the foot platforms to slide towards the center.
d) hold both rail ends and tighthen the locking knob by turning clockwise.
Store your leg trainer in a dry area away from small children and high traffic areas.