Master MAS4A009, User Manual

Page: 49 / 79

EN
Assembly instructions
Occasionally our products contain components that are pre-Iubricated at the factory. We recommend
that you protect flooring, or anything else the parts may contact, with news paper or cloth.
Note: All location references, such as front, rear, left or right, made in these instructions
are from the user standing on the exerciser and facing forward.
STEP 1
ATTACHING THE REAR END CAP
a. Position the Main Frame Assembly on the Left and Right Rail Ends with both Rail Ends slightly apart as
shown. Slide the Rear End Cap onto the Rear Tube
STEP 2
ATTACHING THE FRONT END CAPS
a. Lay the main frame assembly on the floor making sure the rear end cap you just attached is against
the floor as shown.
Slide one front end cap into the support tube assembly, by aligning the notch and the screw hole.
b. Repeat on other side