Master MAS4A009, User Manual

Page: 51 / 79

EN
STEP 4
ATTACHING THE HANDLEBAR ASSEMBLY
a. Loosen the Adjustment Knob located on the Support Tube Assembly by turning counter-clockwise.
b. Pull the Adjustment Knob out and insert the Handlebar Assembly making sure the holes in Ihe Handlebar
Assembly are on the same side as the Adjustment Knob. (The Groove in the Handlebar Assembly will be
aligned with the Notch in the Support Tube Assembly.)
Allow the Adjustment Knob to pop into one of the holes in the Handlebar Assembly. Tighten Adjustment
Knob.
Make sure the Adjustment Knob is tight before beginning exercises.
CARE AND STORAGE
CARE
Your Leg Trainer exerciser has been carefully designed to equire
minimum maintenance.
To ensure this, we recommend that you do the following:
Keep your unit clean. Wipe sweat, dust or other residue off the
Rails, Foot Platforms and Handlebar Assembly with a soft, clean
cloth after each use