DSM410
User’s Manual
Page 176
Revision 1.7.2
6.25 Maretron TLA100 Configuration
Maretron TLA100 tank level adapters on the network may be configured using the DSM410. This
describes the configuration of the Maretron TLA100 firmware version 1.6.15. The TLA100
configuration menu is shown in Figure 189 below.
Figure 189
– TLA100 Configuration Screen
6.25.1
Advanced Configuration
Advanced Configuration changes some complex parameters within the device, and should only be
performed by an advanced user. Typically advanced configuration is only done at installation and
should not need to be done while at sea.
Figure 190
– TLA100 Advanced Configuration Screen
6.25.1.1
Device Instance
This entry allows you to program the NMEA 2000 device instance for the unit. You usually will not
need to modify the default value of “0” unless you have multiple units on the network.
