DSM410
User’s Manual
Page 128
Revision 1.7.2
Figure 122
– Configuring GPS Operating Mode on a GPS100
The allowable options for GPS Mode are “1D” which allows the GPS to report data when only a one-
dimensional fix (time only) or better is obtained; “2D”, which allows the GPS to report data only when
a two-dimensional fix or better is o
btained; “3D”, which allows the GPS to report data only when a
three-
dimensional fix or better is obtained, or “Auto” (default), which allows the GPS to report any
available data, regardless of the quality of the fix.
6.15.4
Device Label
A label may be assigned to the GPS100 as an aid to identifying the device over the network. Typically
this would describe the location of the GPS on the vessel.
See section 3.3.4 for details on how to enter a textual value.
6.15.5
SBAS (WAAS) Enable/Disable
The DSM410 is capable of enabling or disabling the SBAS (WAAS) function on a Maretron GPS
Antenna/Receiver (GPS100). You can change this setting by pressing the Enter key (
) with the
“SBAS: WAAS,EGNOS,MSAS:” menu item selected which causes the screen shown in Figure 123 to
be displayed.
