DSM410
User’s Manual
Page 78
Revision 1.7.2
6.7.4.1.6 Reset Counter
This resets the hardware counter associated with this channel to zero.
6.7.4.1.7 Reset Timer
This resets the hardware timer associated with this channel to zero.
6.7.4.2 Channel #1-#6 Configuration (ALM Mode)
Figure 62
– DCR100 Channel Configuration Screen (ALM Mode)
6.7.4.2.1 Label
This entry allows you to assign a text label to the device. This label is visible in Maretron analysis and
display products and allows you to easily identify the particular device.
6.7.4.2.2 Operating Mode
The operating mode of each channel may be set to either DCR (DC Relay), in which case the state of
the channel is controlled by “Circuit Breaker / Switch” controls in N2KView or “Switch/Breaker”
favorite screens in the DSM150/DSM250/DSM410 displays. This section of the manual assumes the
operating mode has been set to “ALM”.
6.7.4.2.3 ALM Instance
This entry allows you to program the instance number for the ALM function. You may use a value
between 0 and 15. This instance number is used by the DSM150/DSM250/DSM410 or N2KView
when selecting annunciators to sound when programming an alert.
6.7.4.2.4 Test Annunciator
Select this entry to verify functionality of the channel in ALM mode. This will cause the annunciator to
sound or light briefly.
