DSM410
User’s Manual
Page 148
Revision 1.7.2
6.20.1.3
NMEA2000 PGN Enable/Disable
The RAA100 Rudder Angle Adapter transmits the NMEA2000 PGN #127245 which can be turned on
or turned off by the DSM410 display. Pressing the
Enter
key with “NMEA2000 PGN
Enable/Disable…” menu item selected causes the DSM410 to display the following screen (Figure
148).
Figure 148
– RAA100 NMEA 2000
®
PGN Enable/Disable Screen
You can enable or disable the transmission of the Rudder message by pressing the Enter key on the
message to be configured. Options are:
Disable
– The status message will not be transmitted
Default
– The status message will be transmitted at its default NMEA2000 rate.
Select the required option using the
Scroll Up
and
Scroll Down
keys followed by the
Enter
key.
6.20.1.4
Restore Factory Defaults
This option restores all settings on the device to their factory default state.
6.20.2
Label
A label may be assigned to the RAA100 as an aid to identifying the device over the network. Typically
this label will describe the rudder to which the RAA100 is connected (e.g. Port Rudder).
