DSM410
User’s Manual
Page 14
Revision 1.7.2
Trip Fuel Used
– displays the total amount of fuel consumed by that engine on the present trip
(fuel flow transducers that are capable of being reset via the 126208 NMEA 2000
®
command
of the Trip Fuel Used field of the 127497 Trip Parameters, Engine message, such as the
Maretron FFM100, may be reset with the control mode of the display
– see Section 5.2.7.14
for details)
Warning
– displays warning conditions generated by the engine
4.2.10
Environment
Barometric
– displays the current atmospheric (barometric) pressure
Heat Index
– displays the current heat index based on air temperature and humidity
Humidity Inside
– displays the relative humidity from an indoor humidity sensor
Humidity Outside
– displays the relative humidity for an outdoor humidity sensor
Moon Phase
– displays the phase of the moon at the current time and position
Sunrise
– displays the local time of sunrise for the current day and position
Sunset
– displays the local time of sunset for the current day and position
Dew Point
– displays the current dew point based on air temperature and humidity
Temp Engine Room
– displays the air temperature from a sensor mounted in an engine room
Temp Inside
– displays the air temperature from a sensor mounted inside the vessel
Temp Main Cabin
– displays the air temperature from a sensor mounted inside the main cabin
Temp Outside
– displays the air temperature from a sensor mounted outside
Temp Sea
– displays the current temperature of the water
Twilight AM
– displays the time of nautical twilight before sunrise for the current day and position
Twilight PM
– displays the time of nautical twilight after sunset for the current day and position
Weather
– displays a screen with a wide variety of weather-related data (See Section 7.14 for
details)
Wind Chill
– displays the current wind chill based on air temperature and wind speed
4.2.11
Fluid Flow
Flow Rate
– displays the current rate of flow of a fluid
Trip Volume
– displays the total volume of fluid through the sensor on the present trip (fluid flow
transducers that are capable of being reset via the NMEA 2000 command of the Trip Volume
field of the 65287 Trip Volume (Maretron Proprietary) message, such as the Maretron
FFM100, may be reset with the control mode of the display
– see Section 5.2.7.14 for details)
