DSM410
User’s Manual
Page 46
Revision 1.7.2
Trip Log
– may be reset to zero for log transducers that are capable of being reset via the
NMEA 2000
®
command message, such as the Maretron DST110, may be reset with the
control mode of the display
– see Section 5.2.7.14 for details
For resetting “Engine Total Fuel Used”, “Trip Volume”, or “Trip Log”, use the following procedure to
reset the total in the transducer providing the value.
In normal operating mode, use the “Scroll Up” and “Scroll Down” keys to change to the screen
containing the display to be reset. Once that screen is displayed, follow these steps to reset the
appropriate display:
1. Pr
ess the “Enter” key for approximately one second. This will place the display into “Control
mode”, and one of the controllable items on the screen will be highlighted with a thick border.
2. If there is more than one controllable item
on the screen, you may use the “Scroll Up” and
“Scroll Down” keys to change the highlight to the display to be reset.
3. Once the display to be reset
is selected, then press the “Power” key. You will then see a
confirmation popup asking whether it is okay to set the Anchor Drop position to the current
position. If you answer “Yes”, then the Anchor Drop position will be set to the current GPS
position.
4. To exit the control mode,
press the “Lights” key to return to normal operating mode. The
highlight will disappear.
