DSM410
User’s Manual
Page 96
Revision 1.7.2
With the offset value highlighted, you can change the offset by using the
Increase
and
Decrease
keys
(
or
)
. Once you have selected the desired offset, push the
Enter
key (
) to complete
the transducer depth offset calibration. This procedure actually programs the offset value into the
DST110 such that all displays subsequently receive the offset information. This means you don’t have
to program multiple displays each with the corresponding offset information as the information is
stored at a single place (at the source).
6.11.7
Trip Log
The DSM410 is capable of clearing the trip log counter within a DST110 depth/speed/temperature
transducer. You zero the trip log by pressing the Enter key (
) with the “Trip Log:” menu item
selected which results in the screen shown in Figure 80. Pressing the
Accept
(
) key while the
“Reset” menu item is selected will complete the operation. Resetting the trip log zeroes the DST110’s
trip log such that all displays receive a zero
ed value (i.e., you don’t have to perform the operation
from other display locations).
Figure 87
– Resetting the DST110 Trip Distance Log
