DSM410
User’s Manual
Page 54
Revision 1.7.2
With the offset value highlighted, you can change the offset by using the
Increase
and
Decrease
keys
(
or
)
. Once you have selected the desired offset, push the
Enter
key (
) to complete
the transducer depth offset calibration. This procedure actually programs the offset value into the
transducer such that all displays subsequently receive t
he offset information. This means you don’t
have to program multiple displays each with the corresponding offset information as the information is
stored at a single place (at the source).
6.1.10
Trip Log
The DSM410 is capable of clearing the trip log counter within an Airmar speed transducer. You zero
the trip log by pressing the Enter key (
) with the “Trip Log:” menu item selected which results in
the screen shown in Figure 80. Pressing the
Accept
(
) key while the “Reset” menu item is
selected will complete the operation. Resetting the trip log zeroes the transducer
’s trip log such that
all displays receive a zeroed value.
Figure 35
– Resetting the Airmar Speed Sensor Trip Distance Log
