Maquet Servo-i Adult, User Manual, Page: 188 / 283

186 86
Servo
…
User´s manual
US edition
Order No: 66 00 261
7
Infant Adult Universal Options
Servo Ultra Nebulizer ervo Ultra Nebulizer rvo Ultra Nebulizer vo Ultra Nebulizer o Ultra Nebulizer Ultra Nebulizer Ultra Nebulizer ltra Nebulizer tra Nebulizer ra Nebulizer a Nebulizer Nebulizer Nebulizer ebulizer bulizer ulizer lizer izer zer err
WARNINGS! GS!
• Servo Humidifier/HME must be ME must be
disconnected during nebulization. ation.
Otherwise the humidifier may be blocked. be blocked.
• The heated humidifier must be switched witched
off during nebulization. Otherwise the Otherwise the
particle size may be affected. ffected.
• When a Servo Ultra Nebulizer is used, Nebulizer is used,
always consult the drug manufacturer he drug manufacturer
regarding the appropriateness of
ultrasonic nebulization for certain
bulization for certain
medications.
• The nebulizer must not be used without he nebulizer must not be used without
buffer liquid (sterile water). Otherwise the (sterile water). Otherwise the
ultrasonic generator crystal may break. ystal may break.
• Continuously check that the buffer liquid heck that the buffer liquid
level is between MIN. and MAX. during MIN. and MAX. during
nebulization. tion.
• During nebulization: Continuously check check
that moisture is generated in the
medication cup.
• During nebulization a filter must be
connected to the expiratory inlet of the d to the expiratory inlet of the
ventilator. Always carefully monitor the s carefully monitor the
airway pressure during nebulization. during nebulization.
Increased airway pressure could be pressure could be
caused by a clogged filter. The filter should he filter should
be replaced if the expiratory resistance
increases or every 24 hours when the
very 24 hours when the
nebulizer is being used. g used.
• When the ventilator is running on batteries
the nebulizer module is inoperative to zer module is inoperative to
reduce the power consumption..
Cautions:
• Check that the medication cup is
undamaged and that it is firmly in place ged and that it is firmly in place
before the nebulizer is started. ore the nebulizer is started.
• If a nebulizer and a CO O
2
analyzer are in use
simultaneously, the CO
2
reading may be ding may be
affected.
Important:The Servo Ultra Nebulizer may be rvo Ultra Nebulizer may be
interrupted shortly due to overheating. It will d shortly due to overheating. It will
automatically start again when the buffer cally start again when the buffer
water has cooled. During this short period of d. During this short period of
time no alarm is activated and the timer is not ctivated and the timer is not
interrupted.
Note: For information about the stand alone bout the stand alone
Aeroneb Professional Nebulizer System, zer System,
refer to separate manual.
Note: The he Y Sensor measurement can be
incorrect when the Aeroneb Professional when the Aeroneb Professional
Nebulizer System is in use. Therefore, we zer System is in use. Therefore, we
recommend that the Y Sensor is removed commend that the Y Sensor is removed
from the patient circuit during nebulization. patient circuit during nebulization.
Nebulization ebulization bulization ulization lization ization zation ation tion ion on n