Maquet Servo-i Adult, User Manual, Page: 177 / 283

175
Servo
…
User´s manual
US edition
Order No: 66 00 261
Infant Adult Universal Options
7
Showing Open Lung Tool howing Open Lung Tool owing Open Lung Tool wing Open Lung Tool ing Open Lung Tool ng Open Lung Tool g Open Lung Tool Open Lung Tool Open Lung Tool pen Lung Tool en Lung Tool n Lung Tool Lung Tool Lung Tool ung Tool ng Tool g Tool Tool Tool ool oll
Open Lung Tool g Tool for continuous, breath-by- y-
breath graphical presentation of changes in
End inspiratory pressure, PEEP, V
d inspiratory pressure, PEEP, V
T
, Dynamic Dynamic
compliance and tidal CO
2
elimination (when (when
CO
2
Analyzer module is installed). odule is installed).
1. Press the fixed key y Quick access.
2. Press the Open Lung Tool pad pen Lung Tool pad.
Note: When the Y Sensor Measuring Measuring
function is active, then the values recorded in
the Open Lung Tool are based on values
Open Lung Tool are based on values values
measured at the Y-piece. Note that when this ote that when this
function is disabled or enabled, then the
compliance in the patient circuit may cause
pliance in the patient circuit may cause
the values in the Open Lung Tool to change. g Tool to change.
3. Activate Cursor to be able to analyze the ze the
stored breath by breath data. This may
assist in identifying opening and
g opening and
collapse pressures of the lung.
– To move the cursor use the Main Rotary move the cursor use the Main Rotary
Dial or touch screen
Note: If the cursor pad is activated the
cursor values will be shown in the value
will be shown in the value
field
4. To clear all waveforms press clear all waveforms press Clear pad.
Note: The clear pad is not active in t active in
Cursor mode.
5. To close the window, press press Close.
6. Use these pads to alter the resolution on
the time axis.
7. Real time value field.
Note: If additional windows such as loops h as loops
are activated, the Open Lung Tool window g Tool window
will be minimized and some function buttons ction buttons
will not be visible.
Note: Open Lung Tool is not available in Bi- Tool is not available in Bi-
Vent and NIV-modes. modes.
Operating - Open Lung Tool perating - Open Lung Tool erating - Open Lung Tool rating - Open Lung Tool ating - Open Lung Tool ting - Open Lung Tool ing - Open Lung Tool ng - Open Lung Tool g - Open Lung Tool - Open Lung Tool - Open Lung Tool Open Lung Tool Open Lung Tool pen Lung Tool en Lung Tool n Lung Tool Lung Tool Lung Tool ung Tool ng Tool g Tool Tool Tool ool oll