Maquet Servo-i Adult User Manual Download Page 117

Page: 117 / 283

115

Servo

…

User´s manual

US edition
Order No: 66 00 261

Infant

Adult

Universal

Options

Compressor Mini and Servo-i Ventilator on

d Servo-i Ventilator on

the Mobile Cart

Cart

Compressor Mini

ompressor Mini

mpressor Mini

pressor Mini

ressor Mini

essor Mini

ssor Mini

sor Mini

or Mini

r Mini

Mini

ini

nii

Basic principles

The Compressor Mini is designed to supply a

gned to supply a

ventilator with dry, filtered, compressed air.

filtered, compressed air.

The Compressor Mini is designed to work

Mini is designed to work

together with all MAQUET ventilators.

QUET ventilators.

The Compressor Mini is equipped with a

Compressor Mini is equipped with a

h a

Standby function. In Standby mode, the
compressor will start to deliver compressed

pressor will start to deliver compressed

air to the ventilator if the central compressed
air supply fails. The compressor

y fails. The compressor

automatically stops when the central air

n the central air

supply returns.
The Compressor Mini is fitted with two

mpressor Mini is fitted with two

alarms; a temperature alarm that is activated

ure alarm that is activated

if the compressor overheats, and a pressure
alarm that is activated if the air pressure
drops, or increases, outside the acceptable
range. Alarms are audible and visible, with

ge. Alarms are audible and visible, with

error message display.
The outlet air pressure and the operating

nd the operating

time are also indicated on the display.

For further information please refer to the

further information please refer to the

Compressor Mini User’s manual and the

User’s manual and the

Compressor Mini Data Sheet.

Mini Data Sheet.

Read more about compressor

ead more about compressor

ad more about compressor

d more about compressor

more about compressor

ore about compressor

re about compressor

e about compressor

about compressor

bout compressor

out compressor

ut compressor

t compressor

compressor

ompressor

mpressor

pressor

ressor

essor

ssor

sor

mini

ini

nii

Technical data:

page

ge 248

SVX-688_XX

Compressor Mini

ompressor Mini

mpressor Mini

pressor Mini

ressor Mini

essor Mini

ssor Mini

sor Mini

or Mini

r Mini

Mini

ini

nii

Summary of Contents for Servo-i Adult




























































































































































































































































































Search results

Summary of Contents for Servo-i Adult

Reviews:

Maquet Servo-i Adult, User Manual, Page: 117 / 283

Search results

Summary of Contents for Servo-i Adult

Reviews: