41-621.1 HART
®
to Modbus
®
Adaptor Operating Manual
95
19.4.
Reading registers from the HMA
19.4.1
The followings steps demonstrate how to read the PV, SV, TV and QV from a HART device
attached to the HMA. When making any changes to the settings, click on Apply at the top
of the window to write them to the AutoPILOT PRO.
19.4.2
In the Navigation Bar, click on Communication(s), expand the 96-Communication Port(s)
item, and then double-click on Host Comm Port.
19.4.3
Set Calculation to Enabled.
19.4.4
Set the Repeat Timer to the desired sampling interval in seconds.
19.4.5
Ensure that the communication settings match the selections made in step 19.1.1.
19.4.6
Set the Comm. Block Ref to 1, the Comm Block to Modbus Master, and the Block Index to
Entry #1.
19.4.7
Click on Apply to send the settings to the AutoPILOT PRO.
Summary of Contents for Jupiter JM4
Page 2: ......
